8.2.3. Removal and installation of a door of a back

Removal

Fig. 8.4. Socket of wires of an element of heating of back glass


Disconnect the socket of wires of an element of heating of back glass (fig. 8.4).
Remove facing of a door of a back.

Fig. 8.5. Removal of an additional stoplight


Remove an additional stoplight (fig. 8.5).

Fig. 8.6. Removal of the top decorative slip


Remove the top slip from a frame of a back door (fig. 8.6).

Fig. 8.7. Removal of the panel of finishing of a door of a back


Turn off four self-cut screws and remove the panel of finishing of a door of a back (fig. 8.7).

Fig. 8.8. Removal of the side panel of finishing of a door of a back


Remove the side decorative panel of finishing of a door of a back (fig. 8.8).
Turn off four nuts and remove a decorative overlay of a door of a back.

Fig. 8.9. Removal of lamps of illumination of registration plate


Unscrew four screws and remove lamps of illumination of registration plate (fig. 8.9).

Fig. 8.10. Removal of the central console of a door of a back


After removal of assembly nuts (2EA) disconnect a core and remove the central console of a door of a back (fig. 8.10).

Fig. 8.11. Removal of a cleaner of back glass


Remove the lock cylinder, having turned out an assembly bolt, and remove a cleaner of back glass (fig. 8.11).
Disconnect the socket of power supply of the electric motor of an ochitstitel of back glass.

Fig. 8.12. Removal of the electric motor of a cleaner of back glass


Remove the electric motor of a cleaner of back glass after removal of an assembly nut (fig. 8.12).
Remove executive mechanisms of levers of a back door, disconnect sockets and remove levers.

Fig. 8.13. Back door lever



Remove a back door clamp.
Take out lifting adaptation of a back door from the spherical hinge.
Remove a back door after removal of assembly bolts of the hinge of a back door.

Installation
Installation is made as it should be, the return to removal.