fd2baac9

7.3.5. Check of the holding winding of the traction relay

Disconnect a stator winding wire from a conclusion of "M" of the traction relay.

Fig. 7.59. The scheme of check of the holding winding of the traction relay


Connect wires from plugs of 12 V of the rechargeable battery to a conclusion of "S" (+) and to the case of a starter (fig. 7.59).

ATTENTION
It is necessary to make this check quickly, no more than 10 with, for prevention of burn-out of a winding of a starter.

If the leading gear wheel which is put forward manually against the stop remains in the put-forward situation, the holding winding means it is serviceable. If the gear wheel is involved, means there is a break in the holding winding. In this case replace the traction relay.