6.1.7. Removal and installation of a pedal of a brake

Fig. 6.15. Brake pedal



Removal
Remove the switch of stoplights.
Remove the forelock and take out a draft earring finger.

Fig. 6.16. Nuts of fastening of an arm of a pedal of a brake


Turn off nuts of fastening of an arm of a pedal of a brake (fig. 6.16).
Remove an arm together with a brake pedal.

Check
Estimate degree of wear of plugs of a pedal.
Be convinced of lack of deformation of a pedal.
Check a returnable spring.
Check the switch of stoplights.

Fig. 6.17. Measurement of resistance between switch conclusions


By means of an ohmmeter measure resistance between conclusions of the switch (fig. 6.17).
If at the pressed switch pusher the chain is opened (infinitely big resistance), and at the released pusher is (zero resistance) - the switch normal.

Installation
Installation is made upside-down.

NOTE
Do not forget to record an earring finger the forelock.

Tighten nuts of fastening of an arm of a pedal the regulated moment of 13-16 N · m.
Adjust height of installation of a pedal and its free wheeling.
Install the switch of stoplights.