Fig. 6.70. Arrangement of sensors of frequency of rotation of a wheel of ABS

Fig. 6.71. Bolt of fastening of the sensor

Turn off a bolt of fastening of the sensor of frequency of rotation of a wheel (fig. 6.71).

Fig. 6.72. Socket of the sensor of frequency of rotation of a wheel

Disconnect the socket of the sensor of frequency of rotation of a wheel and remove the sensor (fig. 6.72).

Remove a pillow of a back seat.

Fig. 6.73. Laid on panel of a back rack

Remove the laid on panel of a back rack (fig. 6.73).

Remove a wheel.

Fig. 6.74. Removal of the sensor

Disconnect the socket and remove the sensor (fig. 6.74).

Fig. 6.75. Measurement of resistance between sensor conclusions

Measure resistance between conclusions of the sensor (fig. 6.75).

Nominal resistance:

– the sensor of frequency of rotation of a forward wheel – 1275–1495 Ohms.

– the sensor of frequency of rotation of a back wheel – 1275–1495 Ohms.

Fig. 6.76. Measurement of resistance between sensor conclusions at rotation of a wheel

At rotation of a wheel measure tension between conclusions of the sensor (fig. 6.76).

Nominal rate: tension of alternating current is registered.

NOTE Install the voltmeter switch on voltage measurement of alternating current (AC voltage).