5.1.9. Removal and installation of a returnable tube and hose

Removal
Remove a tank of a hydraulic system of the amplifier of steering from its arm.
Remove clamps of fastening of a returnable tube and a hose.
Remove an inlet air hose of the engine assembled.
Disconnect delivery and returnable tubes from the steering mechanism assembled.
Lift the car on the elevator and remove a clamp of fastening of returnable and delivery tubes.
Lower the car and disconnect a clamp of fastening of a returnable tube and a hose.

Installation
Installation of details is made as it should be, the return to removal.

NOTE
At installation of a delivery hose and tube be assembled convinced that they are not overwound and there is no possibility of their contact with other details of the car.

After completion of installation remove air from a hydraulic system of the amplifier of steering.