5.1.8. Removal and installation of hoses of a hydraulic system of the amplifier of steering

Fig. 5.72. Steering hydraulic system hoses


Fig. 5.73. Adjusting tags on the union

Combine adjusting tags on the union, a delivery tube and a hose assembled, then put on a delivery hose (fig. 5.73).
Remove an inlet air hose of the engine assembled.
Remove a clamp of a delivery hose of a hydraulic system of the amplifier.
Disconnect a delivery tube from the union of the steering mechanism.
Lift the car on the elevator and remove a clamp of fastening of returnable and delivery tubes.

Fig. 5.74. Perepuskna bolt of a delivery hose

Lower the car and turn off perepuskny a bolt (24 mm) of a delivery hose on the pump of the hydraulic booster of steering (fig. 5.74).

Fig. 5.75. Delivery hose

Pick up a delivery hose and the phone assembled (fig. 5.75).

Installation of details is made as it should be, the return to removal.

At installation of a delivery hose and tube be assembled convinced that they are not overwound and there is no possibility of their contact with other details of the car.

After completion of installation remove air from a hydraulic system of the amplifier of steering.