5.1.6. Removal of the steering mechanism
Fig. 5.27. Steering mechanism
|
Fig. 5.28. Inlet air hose of the engine
|
Remove an inlet air hose of the engine assembled (fig. 5.28).
Disconnect clamps of delivery and returnable shlag of a hydraulic system of the amplifier.
Merge working liquid from a hydraulic system of the amplifier.
Disconnect delivery and returnable tubes from unions of the steering mechanism.
Fig. 5.29. Driveshaft detachment
|
Disconnect the steering driveshaft from the steering mechanism in salon (fig. 5.29).
Remove a tape collar and push out a protective cover of a shaft of steering, then remove a basic plate of a protective cover.
You will hang out car wheels.
Remove forward wheels.
Fig. 5.30. A detachment of the spherical hinge of a tip of steering draft from a rotary fist
|
Take the forelock, turn off a nut of fastening and disconnect the spherical hinge of a tip of steering draft from a rotary fist with the help of the special tool (09568-31000) (fig. 5.30).
Fig. 5.31. Right arm of fastening of the stabilizer of cross stability
|
Remove the right arm of fastening of the stabilizer of cross stability (fig. 5.31).
Fig. 5.32. Forward muffler
|
Remove the forward muffler assembled (fig. 5.32).
Fig. 5.33. Brackets of fastening of the steering mechanism
|
Remove brackets of fastening of the steering mechanism and clamps of delivery and returnable tubes (fig. 5.33).
Fig. 5.34. Extraction of the steering mechanism assembled through an arch of the right forward wheel
|
Take the steering mechanism assembled through an arch of the right forward wheel (fig. 5.34).
NOTE
Take the steering mechanism slowly and very carefully not to damage protective covers of steering drafts and spherical hinges of tips of steering drafts.
|