Fig. 4.15. The lobby is resistant assembled

Remove a forward wheel.

Fig. 4.16. Arm of a brake hose

Disconnect an arm of a brake hose from a forward rack assembled on models with ABS remove the sensor of frequency of rotation of a wheel from a rotary fist and disconnect a sensor wire from a forward rack (fig. 4.16).

NOTE Do not make considerable efforts at a detachment of details.

Fig. 4.17. Nuts of fastening of the damping support of a forward rack

Turn off three nuts of fastening of the damping support of a forward rack (top) (fig. 4.17).

Fig. 4.18. Bolts of fastening of a forward rack to a rotary fist

Turn off bolts of fastening of a forward rack to a rotary fist (lower) and remove a rack assembled (fig. 4.18).

Before installation of a forward rack be assembled convinced of purity of surfaces of connection of details.

Delay fastening of the details provided below the next nominal moments.

Connect an arm of a brake hose to a forward rack on models with ABS install the sensor of frequency of rotation of a wheel on a rotary fist and connect a sensor wire to a forward rack.