3.2.3. Removal, check and installation of the mechanism of gear shifting

Fig. 3.42. Mechanism of switching of the transmission




Fig. 3.43. Gear shifting lever



Removal
Remove the floor console assembled.
Remove forelocks and clamps of cables of management of the check point from the gear shifting lever.
Remove the gear shifting lever assembled.
Turn off bolts and remove an intermediate arm of cables of management of the check point on a partition of a motor compartment.
Remove forelocks and clamps of cables of management of the check point (from the transmission).

Fig. 3.44. Cables of the choice and gear shifting


Remove cables of the choice and gear shifting (fig. 3.44).

Check
Check operability of a cable of the choice of transfers and be convinced of absence of damage.
Check operability of a cable of gear shifting and be convinced of absence of damage.
Check boots of cables of management of the check point for absence of damage.
Check each plug for lack of wear, attrition, jammings, the complicated movement or damages.
Check a spring for lack of wear or damages.

Installation
Install the gear shifting lever assembled.
Establish cables of the choice and gear shifting.