3.2.2. Removal and installation of a mechanical box предач

Removal
Remove a drain stopper and merge oil from the transmission.
Remove the working cylinder of a hydraulic actuator of coupling.
Remove the case of the air filter assembled.
Remove the rechargeable battery and its pallet.

Fig. 3.37. Speedometer drive cable


Disconnect a cable of the choice of transfers and a cable of gear shifting (fig. 3.37).

Fig. 3.38. Socket of the switch of lamps of a backing


Disconnect the socket of the switch of lamps of a backing (fig. 3.38).
Disconnect a speedometer drive cable.
Disconnect a cable of the drive of coupling or a tube of a hydraulic actuator of coupling.
Remove the lower protection cover of the engine and a side cover of the check point.
Remove forward and back support of the engine assembled.
Remove the left and right forward wheels assembled.
Turn off a bolt of fastening of a forward rack of a suspension bracket to a rotary fist.
Remove shaft of the drive of wheels.

Fig. 3.39. Removal of a starter


Remove a starter (fig. 3.39).

Fig. 3.40. Fixing of the engine on special adaptation


Fix the engine on special adaptation (a traverse 09200-38001) for arms of fastening (fig. 3.40).
Remove a transmission support (at the left).
Turn off the top bolt of fastening of the transmission.

Fig. 3.41. Fastening of a protective cover of a case


Remove a protective cover of a case of the check point (fig. 3.41).
Establish a transmission telescopic rack (Jack T/M) under the transmission.
Turn off the lower bolt of fastening of the transmission.
Remove a casing of coupling and the conducted clutch plate.
Remove a flywheel.
Remove the transmission.

Installation
Installation of details is made as it should be, the return to removal.