3.1.2. Pumping of a hydraulic actuator of coupling
Pumping of a hydraulic actuator of coupling it is necessary to make every time at removal of the connecting pipeline, a hose and/or the main cylinder of a hydraulic actuator of coupling and also in case the pedal of coupling becomes "soft".
Fig. 3.3. Arrangement of the union of pumping of a hydraulic actuator of coupling
|
Weaken an union inhaling for pumping on the working cylinder (fig. 3.3).
Slowly press against the stop a coupling pedal until the liquid effluence stops.
Holding a pedal in extreme forward situation, tighten the union for pumping.
Add in a tank liquid of the required brand to normal level.
Fig. 3.4. The coupling pedal course when pumping
|
ATTENTION
|
Fig. 3.5. Main cylinder of coupling
|