2. Engine

Maintenance
 Check of level of engine oil
 Replacement of engine oil
 Choice of an oil filter
 Replacement of an oil filter
 Check of tightness of the cooling system
 Check of valves of a cover of a radiator
 Check of concentration of antifreeze
 Check of a compression
 Adjustment of a tension of a belt of the GRM drive
 Drive of hinged units
 Natyazhitel of a belt of the drive of hinged units
 Adjustment of a belt of the drive of hinged units
 Adjustment of a belt of the drive of the generator
Mechanical part (engine of 1,6 l)
 Check of the block of cylinders
 Removal and installation of a support of the power unit
 Removal and installation of the engine and transmission assembled
 Removal, check and installation of camshafts
 Removal, check and installation of a belt of the drive of the mechanism of gas distribution
 Dismantling, check and assembly of a bent shaft
 Removal, check and installation of a flywheel (MKPP) or plate of the drive of the hydrotransformer (automatic transmission)
 Dismantling and assembly of conrod and piston group
Mechanical part (engine of 1.8 l)
 Adjustment of a tension of a belt of the GRM drive
 Adjustment of a belt of the drive of hinged units
 Removal, check and installation of camshafts
 Check and adjustment of a gap in the drive of valves
 Dismantling, check and assembly of a bent shaft
 Removal, check and installation of a flywheel (MKPP) or plate of the drive of the hydrotransformer (automatic transmission)
 Dismantling and assembly of conrod and piston group
 Dismantling, check and assembly of a head of the block of cylinders
 Removal, check and installation of a belt of the drive of the mechanism of gas distribution
Cooling system
 Device
 Centrifugal pump of the cooling system
 Removal, check and installation of a radiator of the cooling system
 Check of a cover of a radiator
 Removal, check and installation of the thermostat
 Sensor of temperature of cooling liquid
Lubrication system
 General information
 Removal, check and installation of the oil pump
Power supply system
 Removal, check and installation of a final collector
 Removal, check and installation of an inlet collector
 Removal, check and installation of the air filter
Control system, fuel system and system of decrease in toxicity
 Main malfunctions and their reasons
 Check of technical condition (Check of frequency of rotation of the crankshaft of the engine idling)
 Check of operability of the fuel pump
 System of compulsory ventilation of a case
 System of catching of vapors of fuel
 Fuel supply system
 Check of a control system of the engine with the distributed injection
 Removal, check and installation of fuel nozzles
 System of decrease in toxicity of the fulfilled gases
 Removal and installation of the main muffler
 Check of tightness of system of production of the fulfilled gases
 Cars with catalytic converter in system of production of the fulfilled gases
 Service regulations of cars with catalytic converter in system of production of the fulfilled gases
Tables
 The table 2.1 Dependence between density of cooling liquid and concentration of ethylene glycol
 Table 2.2 Nomenalny adjusting data of belts of the drive of hinged units
 Table 2.3 Technical characteristics of the engine with a capacity of 1,6 l
 Table 2.4 Moments of an inhaling of threaded connections of the engine with a capacity of 1,6 l
 Table 2.5 Searches of causes of defect and ways of their elimination
 Table 2.6 Searches of causes of defect of hydrocompensators and ways of their elimination
 Table 2.7 Repair size of a piston ring and identification tag
 Table 2.8 Technical characteristics of the engine with a capacity of 1,8 l
 Table 2.9 Moments of an inhaling of threaded connections of the engine with a capacity of 1,8 l
 Table 2.10 Searches of causes of defect and ways of their elimination
 Table 2.11 Nominal adjusting data of belts of the drive of hinged units
 Table 2.12 Repair size of a piston ring and identification tag
 Table 2.13 the Repair sizes of openings under saddles of valves
 Table 2.14 the Repair sizes of the directing plugs of valves
 Table 2.15 Technical characteristics of a control system
 Table 2.16 Data for check
 Table 2.17 Moments of an inhaling of threaded connections
 Table 2.18 the Applied sealants
 The table 2.19 Search of Malfunctions in a fuel supply system
 The table 2.20 Search of Malfunctions in a fuel supply system
 Table 2.21 When engine cold
 Table 2.22 When engine cold
 Table 2.23 Diagnostic codes of malfunctions (1.6 l, 1.8 l with the European onboard system of diagnostics)
 Table 2.24 Diagnostic codes of malfunctions (1.6 l, 1.8 l without the European onboard system of diagnostics)
 The table 2.25 Check by means of a tester