2.8. Tables

The table 2.1 Dependence between density of cooling liquid and concentration of ethylene glycol
Table 2.2 Nomenalny adjusting data of belts of the drive of hinged units
Table 2.3 Technical characteristics of the engine with a capacity of 1,6 l
Table 2.4 Moments of an inhaling of threaded connections of the engine with a capacity of 1,6 l
Table 2.5 Searches of causes of defect and ways of their elimination
Table 2.6 Searches of causes of defect of hydrocompensators and ways of their elimination
Table 2.7 Repair size of a piston ring and identification tag
Table 2.8 Technical characteristics of the engine with a capacity of 1,8 l
Table 2.9 Moments of an inhaling of threaded connections of the engine with a capacity of 1,8 l
Table 2.10 Searches of causes of defect and ways of their elimination
Table 2.11 Nominal adjusting data of belts of the drive of hinged units
Table 2.12 Repair size of a piston ring and identification tag
Table 2.13 the Repair sizes of openings under saddles of valves
Table 2.14 the Repair sizes of the directing plugs of valves
Table 2.15 Technical characteristics of a control system
Table 2.16 Data for check
Table 2.17 Moments of an inhaling of threaded connections
Table 2.18 the Applied sealants
The table 2.19 Search of Malfunctions in a fuel supply system
The table 2.20 Search of Malfunctions in a fuel supply system
Table 2.21 When engine cold
Table 2.22 When engine cold
Table 2.23 Diagnostic codes of malfunctions (1.6 l, 1.8 l with the European onboard system of diagnostics)
Table 2.24 Diagnostic codes of malfunctions (1.6 l, 1.8 l without the European onboard system of diagnostics)
The table 2.25 Check by means of a tester