fd2baac9

2.7.10. Removal and installation of the main muffler

Fig. 2.274. Components of system of production of the fulfilled gases



Removal

ATTENTION
Before operations of removal or check of components of system of release be convinced that they cooled down enough.


Fig. 2.275. Detachment of the main muffler


Disconnect the main muffler from the central pipe of system of release (fig. 2.275).

Fig. 2.276. Rubber-metal arms


Remove rubber-metal arms and remove the main muffler (fig. 2.276).
Disconnect the central pipe of system of release (with the forward muffler) from a reception pipe of system of release on the one hand and from the main muffler with another.
Remove rubber-metal arms, and then remove the central pipe of system of release (with the forward muffler).
Turn off bolts of fastening of an arm of a reception pipe of system of release and disconnect a reception pipe from catalytic converter.
Turn off bolts of fastening of a reception pipe of system of release to the central pipe of system of release (with the forward muffler).

Installation
Install components of system of release in the following order: at first reception pipe of system of release, then central pipe of system of release and main muffler. Temporarily delay fastening of components of system of release.
Reliably delay fastening of components of system of release. Be convinced of lack of contact of components of system of release with any details of a body of the car.