2.3. Mechanical part (engine of 1.8 l)
|
Fig. 2.86. General view of the engine
|
The general view is shown in fig. 2.86.
- 1. Operation and maintenance of the car
- 2. Engine
- 2.1. Maintenance
- 2.2. Mechanical part (engine of 1,6 l)
- 2.3. Mechanical part (engine of 1.8 l)
- 2.3.1. Adjustment of a tension of a belt of the GRM drive
- 2.3.2. Adjustment of a belt of the drive of hinged units
- 2.3.3. Removal, check and installation of camshafts
- 2.3.4. Check and adjustment of a gap in the drive of valves
- 2.3.5. Dismantling, check and assembly of a bent shaft
- 2.3.6. Removal, check and installation of a flywheel (MKPP) or plate of the drive of the hydrotransformer (automatic transmission)
- 2.3.7. Dismantling and assembly of conrod and piston group
- 2.3.8. Dismantling, check and assembly of a head of the block of cylinders
- 2.3.9. Removal, check and installation of a belt of the drive of the mechanism of gas distribution
- 2.4. Cooling system
- 2.5. Lubrication system
- 2.6. Power supply system
- 2.7. Control system, fuel system and system of decrease in toxicity
- 2.8. Tables
- 3. Transmission
- 4. Running gear
- 5. Steering mechanism
- 6. Brake system
- 7. Onboard electric equipment
- 8. Body
- 9. Schemes of electric equipment
