2.2.7. Removal, check and installation of a flywheel (MKPP) or plate of the drive of the hydrotransformer (automatic transmission)

Removal
Remove the transmission and coupling.
Remove a flywheel.

Fig. 2.70. Flywheel and plate of the drive of the hydrotransformer



Check
Check a condition of a surface of contact of a flywheel with the conducted clutch plate (lack of uneven wear or damage). Replace a flywheel if the surface is damaged or has considerable wear.
Measure a beating of a surface of contact of a flywheel with the conducted clutch plate.
Nominal rate of a beating of a flywheel: 0,1 mm.
Check a condition of a gear wreath of a flywheel (absence of damage, cracks and considerable wear) and replace it if necessary.

Installation
Establish a flywheel assembled and tighten fastening bolts the nominal moment of an inhaling.
Moment of an inhaling of a bolt of fastening of a flywheel: 120–130 N · m.