fd2baac9

1.7.2. Start of the engine

The combined ignition lock
If the car is equipped with the mechanical transmission, transfer the gear shifting lever to neutral situation and completely squeeze out a coupling pedal.
If the car is equipped with the automatic transmission, transfer the selector to situation "P" ("Parking").
To start the engine, insert a key into the lock of ignition and turn it in situation "START" ("Starter"). Release the ignition key at once after start of the engine. Do not hold the ignition key in situation "START" ("Starter") more than 15 pages.

NOTE
For safety the engine of the car cannot be started if the selector of the automatic transmission is not in situation "P" ("Parking") or "N" ("Neutral transfer") (only for cars with the automatic transmission).

Provisions of the lock of ignition
"LOCK": "Blocking".
"ASS": "The additional equipment".
"ON": "Is included".

Fig. 1.131. Provisions of the lock of ignition



"START": "Starter".
"START".
In this situation the starter works. It turns a bent shaft of the engine until ignition is switched off.
"ON".
In this situation the engine works, and all electric systems can be included. It is not necessary to leave the ignition key in the provision of "ON" when the engine does not work. It will lead to the category of the rechargeable battery and an exit of system of ignition out of operation.
"ACC".
When the ignition key is in this situation, it is possible to include some electric systems (the radio radio tape recorder, the lighter, etc.).
"LOCK".
The ignition key can be inserted or taken out only in this situation.

NOTE
To unblock a steering wheel, insert a key into the lock of ignition and, having slightly turned a wheel, at the same time turn the ignition key.

To take out a key from the ignition lock:
– turn the ignition key in the provision of "ASS".
– at the same time press and turn the ignition key counterclockwise from the provision of "ASS" in the provision of "LOCK".

Fig. 1.132. Extraction of a key from the ignition lock



Start of the engine (for cars with system of the distributed fuel injection)

Fig. 1.133. Start of the engine



1. The driver and all passengers who are in the car have to fasten the corresponding seat belts.
2. Check that the parking brake was switched on.
3. Press a brake pedal.
Cars with a mechanical box before.
Completely press a pedal of coupling and transfer the gear shifting lever to neutral situation. Hold a coupling pedal in completely pressed situation in operating time of a starter.
Cars with automatic transmission.
Transfer the lever of the switch of ranges to situation "P" ("Parking"). If it is necessary to start the engine on the run of the car, transfer the lever of the switch of ranges to situation "N" ("Neutral").

NOTE
Cars with automatic transmission.
Inclusion of a starter is blocked if the lever of the switch of ranges is not in situation "P" ("Parking") or "N" ("Neutral").

5. Turn the ignition switch in situation "START" ("Starter") and hold the handle in this situation before launch of the engine (but not longer 10 c).
6. After start-up let's the engine work idling about 10 pages.

NOTE
If the key turns in the ignition lock hardly, shake a steering wheel here and there to unload the locking element.